This is a pre-order, please allow up to 2 weeks for delivery
It all starts with the frame...
A lightweight 6061 alloy frame is the foundation for comfortable cycling. Paired with a lightweight threadless steering system, this bike is built to fly.
Culver Road Bike - 14 Speed - Black
Designer: Retrospec
Sold Out
Shimano drivetrain...
Culver boasts a Shimano drivetrain with 14 speeds for a broad range of gearing and mounted thumb shifters for precise and smooth shifting.
FRAMESET:
- 6061 alloy classic road ‘double-diamond’ frame, 2 sets water bottle braze-ons Rear rack braze-ons Double rear dropout eyelets Decals protected by clear-coat
WHEELSET:
- Rims Retrospec aluminum double-wall 32H, 30mm apex section, precision machined brake tracks with wear indicator
- Hubs Aluminum, ball-bearing, 32H, QR Front/100mm & Rear/135mm
- Spokes 14G stainless steel
- Tires Retrospec 700 x 28C all-season, P/V valves
DRIVETRAIN:
- Rear Derailleur Shimano Tourney A070
- Front Derailleur Shimano Z500
- Shifters Shimano A050 handlebar mounted thumb shifters
- Crank Prowheel Alloy 3-piece cranks 2 x 7 - 170mm x 34/50T
- Chain KMC Z-series 1/2 x 3/32"
- BB Sealed Cartridge 68 x 116mm
- Freewheel/Cog Shimano Z500 14-28T, 7S
COMPONENTS:
- Headset 1 1/8" (28.6mm) steel, Threadless
- Brakes Aluminum alloy dual-pivot side-pull calipers & aluminum brake levers
- Handlebars Alloy Drop Anatomic - 420mm width 25.4mm clamp
- Grips Retrospec Road Rap
- Stem Aluminum alloy Threadless 1 1/8"-ext.90mm x -10d
- Saddle Retrospec Road
- Seatpost Alloy 27.2mm x 350mm w/integrated seat clamp
- Seatpost Clamp Aluminum alloy
- Pedals Alloy/Nylon: High Impact, Reinforced Nylon Resin body, Alloy cage, w/toe-clips & straps, 9/16"
| Size | Height Range | Standover Height |
| 45cm - XS | 4'9"-5'1" | 30.5" |
| 50CM - S | 5'2"-5'5" | 31" |
| 54CM - M | 5'6"-5'8" | 32.5" |
| 58cm - L | 5'9"-5'11" | 34" |
How to measure my inseam for a bike
Your inseam can help you find the perfect sized bike (measuring it properly is similar to pant inseams but measured a little differently). Here's how they work:
- Stand upright with your feet 6-8" apart.
- Using a tape measure or tailor tape, measure from the bottom of your foot to the top of the inside of your leg.
- Compare your inseam measurement to the standover height of the bike. You should have about an inch of space between your body and the top tube.